
The Cisco Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost. This PoE injector is specifically designed to meet the power needs of Cisco Meraki 802.3at-compatible devices. Check the access point specifications to ensure compatibility.
Technical Specifications
Compatible With
- All indoor and outdoor APs
Power
- Input Voltage: 100 to 240 VAC
- Input Current: 0.8A maximum
- AC Input Frequency: 50-60 Hz
- Maximum Output Power: 30 W
- Powered device can be up to 100m away from power injector
Data
- Compatible with 10/100/1000 Mbit/s Ethernet, full duplex
Environmental
- Operating Temperature: (32 to 104°F (0 to 40°C)
- Storage Temperature: (-4 to 158°F (-20 to 70°C)
- Operating Humidity: 5 to 93%
Additional Features
- Short-circuit protection
Physical Dimensions
- 6.3” × 2.1” × 1.4” (160 mm × 52.5 mm × 35.5 mm)
- Weight: 0.46 lb (210 g)
Mounting
- Mounts to walls (anchors and screws not included)
Compatibility
- Complies with 802.3at standard
- Backward compatibility with 802.3af MR-series access points
- For all indoor and outdoor APs
LED Indicators
- Input Power
- Fault
- Detect/connected to valid 802.3at load
Ordering Information
- MA-INJ-4-US Meraki 802.3at Power over Ethernet Injector (US plug)
- MA-INJ-4-EU Meraki 802.3at Power over Ethernet Injector (EU plug)
- MA-INJ-4-UK Meraki 802.3at Power over Ethernet Injector (UK plug)
- MA-INJ-4-AU Meraki 802.3at Power over Ethernet Injector (AU plug)